How to set up and use speed dialing

How to set up and use speed dialing - Rolm phone

Document number: 72001

You can use Speed Dial to easily connect to often-used phone numbers. Click on one of the choices below:

Programming speed dial numbers
Dialing a programmed number using speed dial

The speed dialing feature of your Rolm telephone requires that you program individual numbers before they can be used. Follow these steps to program a speed dial number on your phone:

Press { #} { #} (2 pound keys), and then { 3}.
Enter the speed code you want to assign to the phone number.
Enter the phone number as you would dial it normally.
Hang up.

Examples:

Example #1: To program a PeopleSoft Teaneck extension from another PeopleSoft office to a speed code of 1, enter:

# # 3 1 6-832-2XXX.

Example #2: To program an outside number to a speed code of 2, enter:

# # 3 2 8-1-YYY-XXX-XXXX

Note: 8 is needed to access an outside line at corporate offices; number at other offices may vary
1-YYY is needed only if you are dialing outside your current area code.

The phone number should now be accessible using speed dialing.

Click here to go back to the beginning of this document.

To dial a programmed number using speed dialing:

Press { #) { 3} speed code.

Using Example #1 for programming numbers, to call the person in Teaneck, press # 3 1.

Your programmed speed dial number should work.

Click here to go back to the beginning of this document.